Marshall Electronics
BC-0103-08 - Low cost Analog to Digital (SDI) Converter
Composite Video or Y/C (S-Video) (NTSC/PAL) to Serial Digital
Interface (SDI) conversion module. Featuring automatic cable
compensation, 10-bit processing and a superior adaptive comb
filter, the BD-0103-08 is an ideal solution for DTV applications
and facility transitions to a digital environment.
ꢀ MSRP of $495.00 includes module and power supply
ꢀ Converts Composite Video or Y/C to Digital Component (SDI)
ꢀ NTSC or PAL operation with automatic detection
ꢀ Illuminated power and input signal indicators
ꢀ Adaptive filtering removes NTSC interlace artifacts
ꢀ 2 x over sampling for true color reproduction
ꢀ 10 Bit analog to digital conversion
ꢀ 8-bit qauntization of output signal
ꢀ Supports closed captioning
SPECIFICATIONS
Signal Input
BNC for Composite Video 75Ω, 4 pin mini-din Y/C Video
Signal Output
2 BNC SDI 8 bit Component Digital (SMPTE-259M/ITU-R BT601)
Sample Frequency
K factor
27mhz
<1%
Signal to Noise
Differential gain/phase
Input Cable length
>54 db
0.7% / 0.6°
Up to 1000ft (300m) AGC compensated (Belden 8281)
1910 East Maple Ave. El Segundo, CA 90245 • Tel.: 800-800-6608 • Fax: 310-333-0688 • www.LCDRacks.com • Email: [email protected]
GENERAL INFORMATION
6V D.C. from external supply 3.0 Amp max
4.75”W x 3.75”D x 1.0”H
INCLUDED ACCESSORYS:
Power required
Dimensions
Weight
ꢀPower Supply (Class 2)
ꢀUsers Guide
ꢀRack Mount Brackets
0.55 lbs
OPTIONAL ACCESSORY:
ꢀDesktop Stand V-CB1
V-CB1 Desktop Stand
Warranty
V-CRM-2 - 2U (1.75” tall) Conversion and Distribution 2 Module Bracket.
V-CRM-3 - Single 3U (1.75” tall) Conversion and Distribution 3 Module Bracket.
Marshall Electronics warranties to the first consumer, that this BD-0914-D HDSDI or SDI Signal Distribution Amplifier will, under normal use, be free from de-
fects in workmanship and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the first consumer only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a
warranty claim, Marshall Electronics reserves the right, not to honor the warranty set forth above. Therefore, labor and parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in design or con-
struction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above, or
to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.
Due to constant effort to improve products and product features, specifications may change without notice.
1910 East Maple Ave. El Segundo, CA 90245 • Tel.: 800-800-6608 • Fax: 310-333-0688 • www.LCDRacks.com • Email: [email protected]
|